the big deal ? high rejection ? fast roll-off ? wide passband ? miniature shielded package product overview the RLPF-1520+ is a lowpass flter in a shielded package (size of 0.500" x 0.500" x 0.180") fabricated using smt technology. covering dc to 1520 mhz band width, these units offer good matching within the passband and high rejection. this model uses a miniature high q capacitors and chip inductors for high reliability. in addition it has repeat - able performance across production lots and consistent performance across temperature. key features RLPF-1520+ 50 ? dc to 1520 mhz case style: ck605 low pass filter surface mount page 1 of 3 feature advantages fast roll-off fast roll-off, this will attenuate frequencies closer to the passband with good rejection. good ultimate rejection this enables the flters to attenuate spurious signals and reject harmonics for broadband frequency. small size, 0.500" x 0.500" x 0.180" the small surface mount package enables the RLPF-1520+ to be used in compact designs. notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
surface mount RLPF-1520+ applications ? military-aircraft ? marine communication electrical specifcations at 25c case style: ck605 maximum ratings operating temperature -40c to 85c storage temperature -55c to 100c rf power input 1.5w max. permanent damage may occur if any of these limits are exceeded. rev.a m151121 RLPF-1520+ edu0903 urj 161014 page 2 of 3 features ? high rejection ? fast roll-off ? wide passband ? miniature shielded package typical frequency response functional schematic typical performance data at 25 c 50 dc to 1520 mhz low pass filter RLPF-1520+ insertion loss (full band) 0 10 20 30 40 50 0 800 1600 2400 3200 frequency (mhz) insertion loss (db) 0 1 2 0 380 760 1140 1520 RLPF-1520+ vswr 1 6 11 16 21 26 31 0 800 1600 2400 3200 frequency (mhz) vswr 1.0 1.1 1.2 0 380 760 1140 1520 RLPF-1520+ insertion loss (passband) 0 5 10 15 0 500 1000 1500 2000 frequency (mhz) insertion loss (db) RLPF-1520+ group delay 0.6 0.9 1.2 1.5 1.8 2.1 0 380 760 1140 1520 frequency (mhz) group delay (ns) parameter f# frequency (mhz) min. typ. max. unit pass band insertion loss dc-f1 dc-1520 1.2 2.0 db freq. cut-off f2 1620 3.0 db vswr dc-f1 dc-1520 1.3 1.92 :1 stop band rejection loss f3-f4 1870-3200 20 31 db vswr f3-f4 1870-3200 20 :1 rf in rf out frequency (mhz) insertion loss (db) vswr (:1) frequency (mhz) group delay (nsec) 1 0.02 1.00 1 0.93 30 0.06 1.02 50 0.70 120 0.12 1.04 200 0.69 330 0.24 1.09 300 0.70 840 0.48 1.09 400 0.71 1400 1.00 1.12 500 0.72 1520 1.34 1.10 600 0.74 1620 2.73 1.85 700 0.77 1630 3.14 2.09 800 0.80 1680 6.92 4.62 850 0.82 1730 13.36 9.58 900 0.84 1780 20.77 14.74 1000 0.89 1850 30.99 20.22 1100 0.95 1870 33.60 21.46 1200 1.04 1900 37.14 22.87 1250 1.10 2000 42.97 26.74 1300 1.17 2250 41.38 28.03 1350 1.25 2500 41.02 25.94 1400 1.36 2850 40.16 23.18 1500 1.72 3200 37.16 21.73 1520 1.83 f1 f2 frequency (mhz) insertion loss (db) f3 f4 dc notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
suggested layout, t o l e r a n c e t o b e w i t h i n . 0 0 2 pcb land pattern outline drawing input 2 output 10 not connected 14 ground 1,3,4,5,6,7,8,9,11,12,13,15,16 pad connections demo board mcl p/n: tb-10+ suggested pcb layout (pl-012) RLPF-1520+ inch mm outline dimensions ( ) page 3 of 3 a .500 12.7 b .500 12.7 c .180 4.57 d .100 2.54 e .080 2.03 f .115 2.92 g .060 1.52 h .040 1.02 j .540 13.72 k .060 1.52 l .100 2.54 m .135 3.43 n .135 3.43 p .115 2.92 q .140 3.56 r .070 1.78 s .150 3.81 t .070 1.78 wt. grams 1.0 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com low pass filter outline drawing pad connections demo board mcl p/n: tb- suggested pcb layout (pl- inch mm outline dimensions ( )
|
